• Material: Aluminum alloy
  • Thread:510 Thread
  • Product size (L x W x H) :92.5 x 43.5 x 28.5 mm
  • Battery Single:18650
  • Resistance range:0.03 – 1ohm (TC mode), 0.09 – 3ohm (VW mode)
  • Wattage:5W-80W
  • Temperature Control:212’F-572’F/100-300℃
  • Firmware Upgradable
  • Supports Ni/Ti/SS316, also with TCR function
  • House single 18650 or 26650 battery

Wotofo has just released their newest flagship box and that is the Chieftain 80W TC box mod. I personally don’t know that much about Wotofo’s mods but I have used their RDAs and RTAs like the Troll version two which I still have and the Serpent Mini tank. This little guy features a wide range of technology and is completely customizable to suit your vaping needs.

Wotofo Chieftain 80W TC Mod Box is made from Aluminum Alloy and is powered by a single 26650 battery or 18650 battery. It comes with an adapter for the 18650. It measures at 92.5 x 43.5 x 28.5 mm and can accommodate most of the atomizers in the market with its 510 gold plated and spring loaded connection. It offers four different modes to choose from; there is your regular Variable Wattage Mode, Temperature control mode (supports Nickel, Titanium and Stainless Steel SS316), the Joule mode which automatically sets temperature based on the coil that you are using, and lastly the DIY mode that will allow users to control the way they want their coils to be heated.

In the DIY mode, you can set the temperature or wattage that you want to use during the pre-heat of the coil and you can manipulate how much you heat you want to have on the coils while you are holding down the firing button while you puff. For example, I had my mod initially set at 60W then I will choose the DIY mode and will set my preheat to 120W for 0.45 seconds and go down to 90W for 1 second then it goes back to my initial 60W after that. This way you can protect more of your cotton and also create different pattern in which you will get the result you wanted. I like to describe it as having the power to jump start your coil while on the variable wattage mode.

This device has a maximum output of 80W for VW and 300 degrees Celsius for TC. It can handle coil resistance ranging from 0.09 ohm – 3ohms for Variable Wattage mode and 0.03ohm – 1ohm for Temperature Control mode.

For the purpose of the test, I used my VGOD RDTA 24mm with fused Clapton wires dual coil, reading at 0.44ohms. I had the Chieftain set at 55W Variable wattage mode. Nice results, it is not stressing my coils, I think the power output is accurate and I did not get any misfires with the firing button. I tried vaping it at 80W and it held up pretty well. The mod is not heating up and was able to produce the power that I am looking for.

I am really not a fan of different modes but I do like the DIY mode of this mod. I tried it with my VGOD. I had my mod initially set at 55W. For the DIY mode, I set the pre-heat to the maximum 80W for 1 second and it should go down to my initial wattage of 55W. The result is amazing, I got more vapor and more flavor compared to when I was in Variable wattage mode. The 80W pre-heat heats up my coil just enough to get the vapor then when it got down to 55W it is all flavor. This feature is great for both cloud and flavor chasers.


Overall, Wotofo Chieftain 80W TC Mod Box is a great starter kit and it is not just beginners it can also suit the needs of advance vapers. It offers better features compared to other mid-sized mods in the market. The DIY mode wins it for me.


  • DIY mode. In this mode, you can customize the way you heat your coils so you can get the result that you are looking for and not stress your cotton.
  • I really love having the option to use 26650 or 18650.


  • There is a 0.5 – 0.8 second delay when you hit the firing button. I hope this can be cleared out with their future upgrades.
  • The manual indicated the micro USB port as the charging and then another part of the manual says that the port is just for upgrades. This can be confusing and dangerous for other vapers especially for the beginners. Fix the manuals.
  • The battery cover makes a rattling sound making me think that the magnets are not powerful enough to hold the covers, although it did not fell off when I was using it.

What’s in the Box?

  • 1 x Chieftain 80W Box MOD
  • 1 x Manual Card
  • 1 x USB chord for Firmware Upgrade
  • 18650 adapter